Data for: Sensor Setpoints that Ensure Compliance with Microbial Water Quality Targets for Membrane Bioreactor and Chlorination Treatment in On-Site Water Reuse Systems

Widespread implementation of on-site water reuse systems is hindered by the limited ability to ensure the level of treatment and protection of human health during operation. In this study, we tested the ability of five commercially available online sensors (free chlorine (FC), oxidation-reduction potential (ORP), pH, turbidity, UV absorbance at 254 nm) to predict the microbial water quality (removal of bacteria, removal of viruses, regrowth of bacteria) in membrane bioreactors followed by chlorination using logistic regression-based and mechanism-based models. We found that FC and ORP alone could predict the microbial water quality well, with ORP-based models generally performing better. We further observed that prediction accuracy did not increase when data from multiple sensors were integrated. We propose a methodology to link these online measurements to risk-based water quality targets, providing operation setpoints protective of human health for specific combinations of wastewaters and reuse applications. For instance, we recommend a minimum ORP of 705 mV to ensure a virus log-removal of 5, and an ORP of 765 mV for a log-removal of 6. These setpoints were selected to ensure that the percentage of events where the water is predicted to meet the quality target when it does not remains below 5%. Such a systematic approach to set sensor targets could be used in the development of water reuse frameworks (e.g., guidelines and regulations) that aim to cover a range of reuse applications with differential risks to human health.